AGCP

  Association of Golf Clubfitting Professionals

Certification Requirements for AGCP Member Qualification Levels

AGCP Certification is available only to AGCP Gold Level & above members in good standing for as long as they are a member, all special memberships will have to upgrade to full a Gold Level by paying the difference in annual dues before they can apply for certification. (your certificate will not be updated if you do not renew your membership). Certification is available to any AGCP Gold Level Member in good standing after being a member for 1 year.


AGCP members are tested and Qualified for listing on the AGCP web site using the following Levels of Qualifications. If you find a member on the locator pages. check his Qualification Level to determine his experience, qualifications and the equipment he has in his shops.

When you find your local AGCP member, look at his Qualification Level to see what his experience level is and what equipment he has in his shop.

The requirements as listed below are a firm guide to what we need to have from any member seeking certification status. If the answers on a members test indicate they should be higher or lower we will certify only to the level we believe our member is capable of working to. When "a hitting net" is mentioned below if a member does not have an indoor shop and works at a driving range the driving range will be the same as a hitting net.

AGCP Level 1 – Member of AGCP – Level 1 must take a proficiency test and prove they have at least the minimum ability to do business as a Professional and a minimal amount of equipment to do business and help golfers. Level 1 members may or may not have attended any schools, and may only have an apprenticeship for their training, but have been tested for a minimum of knowledge and experience to help you in some ways. It is advised that you call Level 1 members and satisfy yourself that they are capable of doing what you need.

AGCP Level 2 – Member of AGCP and has attended at least 1 recognized school or certification course at Golfworks, Golfsmith, Mitchell, or attended a school, Certification class, or seminars by the AGCP or one of the equipment or component manufacturers. Written and/or Verbal testing required.

AGCP Level 3 – Member of AGCP and has attended at least 2 recognized schools or certification courses, at Golfworks, Golfsmith, Mitchell, or attended a school, Certification class, or seminars by the AGCP or one of the equipment or component manufacturers. Written and/or Verbal testing required.

AGCP Level 4 – Member of AGCP and has attended at least 3 recognized schools or certification courses, at Golfworks, Golfsmith, Mitchell, or attended a school, Certification class, or seminars by the AGCP or one of the equipment or component manufacturers. Written and/or Verbal testing required.

AGCP Level 5 – Member of AGCP and has achieved Certification thru PCS GCA, or ICG testing, or has been building and/or fitting clubs for 3 or more years with appropriate schools or certification courses, at Golfworks, Golfsmith, Mitchell, ICG or attended a school, Certification class, or seminars by the AGCP or one of the equipment or component manufacturers. Member has fitting ability but limited equipment. Written and/or Verbal testing required.

AGCP Level 6 – Member of AGCP and has achieved Advanced Certification thru PCS GCA or ICG testing, and/or Golfworks, Golfsmith, Mitchell or attended a school, Certification class, or seminars by the AGCP or one of the equipment or component manufacturers, and/or has been building and/or fitting clubs for 5 or more years with appropriate schools or certification courses listed above. Member has fitting ability but limited equipment. Written and/or Verbal testing required.

Advanced Level Certifications

AGCP Level 7 – Member of AGCP and has achieved Certification thru PCS GCA or ICG testing, and/or has been building and/or fitting clubs for 3 or more years and/or or attended a school, Certification class, or seminars by the AGCP or one of the equipment or component manufacturers. Member has a complete shop with hitting net, launch monitor, gauges for measuring shafts & heads and the ability to bend clubs to fit. Equipment must include Launch monitor or swing analysis equipment similar to Trackman, Flightscope, Golf Achiever, Vector, or other recognized equipment for swing testing. Member has bending equipment for loft and lie on irons, appropriate shaft pulling equipment, equipment to spine shafts and measure frequency of shafts and can build to swing weight or MOI. Written and/or Verbal testing required.

AGCP Level 8 – Member of AGCP and has achieved Certification thru PCS GCA or ICG testing, and/or has been building and/or fitting clubs for 5 or more years and/or or attended a school, Certification class, or seminars by the AGCP or one of the equipment or component manufacturers. Member has a complete shop with hitting net, launch monitor, gauges for measuring shafts & heads and the ability to bend clubs to fit. Equipment must include Launch monitor or swing analysis equipment similar to Trackman, Flightscope, Golf Achiever, Vector, or other recognized equipment for swing testing. Member has bending equipment for loft and lie on irons, appropriate shaft pulling equipment, equipment to spine shafts and measure frequency of shafts and can build to swing weight or MOI. Written and/or Verbal testing required.

AGCP Level 9 – Member of AGCP and has achieved Certification thru PCS GCA or ICG testing, and/or has been building and/or fitting clubs for 3 or more years and/or or attended a school, Certification class, or seminars by the AGCP or one of the equipment or component manufacturers. Member has a complete shop with hitting net, launch monitor, gauges for measuring shafts & heads and the ability to bend clubs to fit. Equipment must include Launch monitor or swing analysis equipment similar to Trackman, Flightscope, Golf Achiever, Vector, or other recognized equipment for swing testing. Member has bending equipment for loft and lie on irons, appropriate shaft pulling equipment, equipment to spine shafts and measure frequency of shafts and can build to swing weight or MOI. Written and/or Verbal testing required. Member also has video capability and/or teaching capabilities. Written and/or Verbal testing required.

AGCP Level 10 – Member of AGCP and has achieved Certification thru PCS GCA or ICG testing, and/or has been building and/or fitting clubs for 5 or more years and/or or attended a school, Certification class, or seminars by the AGCP or one of the equipment or component manufacturers. Member has a complete shop with hitting net, launch monitor, gauges for measuring shafts & heads and the ability to bend clubs to fit. Equipment must include Launch monitor or swing analysis equipment similar to Trackman, Flightscope, Golf Achiever, Vector, or other recognized equipment for swing testing. Member has bending equipment for loft and lie on irons, appropriate shaft pulling equipment, equipment to spine shafts and measure frequency of shafts and can build to swing weight or MOI. Written and/or Verbal testing required. Member also has video capability and/or teaching capabilities. Written and/or Verbal testing required.

AGCP Level 10 Plus Retail – Member of AGCP and has achieved Certification thru PCS GCA or ICG testing, and/or has been building and/or fitting clubs for 5 or more years and/or or attended a school, Certification class, or seminars by the AGCP or one of the equipment or component manufacturers. Member has a complete shop with hitting net, launch monitor, gauges for measuring shafts & heads and the ability to bend clubs to fit. Equipment must include Launch monitor or swing analysis equipment similar to Trackman, Flightscope, Golf Achiever, Vector, or other recognized equipment for swing testing. Member has bending equipment for loft and lie on irons, appropriate shaft pulling equipment, equipment to spine shafts and measure frequency of shafts and can build to swing weight or MOI. Written and/or Verbal testing required. Member also has video capability and/or teaching capabilities. Member has a retail location in their community. Written and/or Verbal testing required.

AGCP Level 10 Plus Teaching Plus Retail – Member of AGCP and has achieved Certification thru PCS GCA or ICG testing, and/or has been building and/or fitting clubs for 5 or more years and/or or attended a school, Certification class, or seminars by the AGCP or one of the equipment or component manufacturers. Member has a complete shop with hitting net, launch monitor, gauges for measuring shafts & heads and the ability to bend clubs to fit. Equipment must include Launch monitor or swing analysis equipment similar to Trackman, Flightscope, Golf Achiever, Vector, or other recognized equipment for swing testing. Member has bending equipment for loft and lie on irons, appropriate shaft pulling equipment, equipment to spine shafts and measure frequency of shafts and can build to swing weight or MOI. Written and/or Verbal testing required. Member also has video capability and/or teaching capabilities. Member has a retail location in their community. Written and/or Verbal testing required. Member also has teaching capabilities as a former or current PGA Professional or certification through one of the recognized Golf Teaching Schools. 

Teaching – Send copy of Teaching Certificate issued upon successful completion of your teaching school, copy of PGA Class A card or notarized letters from Head Professionals you have worked under attesting to your teaching ability along with photo copy of their Class A card.

Retail – Submit copy of Business license and/or tax except certificate and picture of your shop or storefront.

A Master of Golf Club Technology AGCP member has achieved the following:

  • Masters must have experience as a Professional Club Technician, Fitter & Builder
  • - Full-Time (5 Years)
  • - Part-Time (10 Years)
  • (*At the time of nomination the nominee must have a local business license)
  • Masters must achieve AGCP Level 10 at least 12 months prior to nomination
  • Masters must have attended at least 2 Roundtable Education Conventions
  • Masters must have made at least one Presentation at a Roundtable or be scheduled for one in the upcoming event.
  • Masters must be nominated by 3 or more Current AGCP Masters
  • Masters must have knowledge and training in golf swing mechanics and know now the golf swing and golf club work together.
  • In addition the Master of Golf Club Technology of the future must have completed a series of special Certification Classes in the different areas of clubfitting and club building to show that he is not only generally qualified but qualified in every area of clubfitting and club building. Such areas as Length Fitting, Trajectory Fitting, Shaft Profile Fitting for both Woods and Irons, Wedge Fitting, Grinding heads for special playing conditions, and many, many areas too numerous to list. 

Schools Recognized will be from: AGCP – PGA – PCS – Golfworks – Golfsmith – Mitchell – Dynacraft – Rifle Certification – True Temper Black Certification – 2 Professional Teaching Schools

Powered by Wild Apricot Membership Software